Manure Spreaders

  • HS ground drive manure spreader

    GROUND DRIVE MANURE SPREADERS

    MODEL 1125

    • 6 x 12 Deep Lug traction tires.
    • The beater on Model 1125 is 20" in diameter and with 8 paddles provides an even spread of material.
    • Seperate Apron Engage/Disengage Lever - Beater Engage/Disengage Lever.


    MODEL 1150

    • Deep Lug - 7.60 x 15 traction tires.
    • The Model 1150 uses a heavy duty 8 paddle beater assembly.
    • The Beater is chain driven. The main apron is driven by a simple adjustable ratchet drive mechanism.
    • To engage the beater and main apron on Model 1150, lower the control lever.


    MODEL 1180

    • Deep Lug - 7.60 x 15 traction tires.
    • The Model 1180 uses a heavy duty 8 paddle beater assembly.
    • The Beater is chain driven. The main apron is driven by a simple adjustable ratchet drive mechanism.
    • To engage the beater and main apron on Model 1180, lower the control lever.
  • HS standard duty manure spreader

    STANDARD DUTY MANURE SPREADERS

    2180/2112/2117 Features:

    • Heavy Duty Steel A-frame and hitch assembly are built to withstand the stress of heavy loads and rough fields.(2180 & 2112)
    • All welded heavy duty A-frame hitch assembly and full length unitized main frame.(2117)
    • Heavy duty 2-speed apron drive system plus beater shutoff for a positive drive and long life.
    • A heavy duty beater assembly assures aggressive shredding action with even wide spread patterns.
    • Spreader box sides are constructed of corrosion resistant galvanized steel.
    • Main apron tightener bolts are located outside on the lower right and left corners of the main frame.
  • HS heavy duty manure spreader

    HEAVY DUTY MANURE SPREADERS

    FEATURES/OPTIONS Model 3123 - 235 Bushel/Model 3127 - 270 Bushel

    • A massive unitized welded frame with heavy floor supports and side stakes, wrap around steel front corners. Strong rear main beater side panels are slanted for clearance and wider spread, and then welded to the strong 5" U channel side members compare with any on the market.
    • The side flares on all H&S "Heavy Duty" manure spreaders are made of 10 gauge g210 culvert grade galvanized steel.
    • Sides, front panel and both sides of the rear hydraulic end gate use fiberglass reinforced plywood to provide for easy cleaning and minimal freeze up. It also features a plastic coated plywood floor. Considerably less torque is needed to move a heavy load.
    • A front splash guard is standard equipment.
    • Greaseable bearings.
    • The drive utilizes the patented H&S 2 speed gear box. Shifting is all done in the enclosed two speed/beater shutoff gear box.
    • An optional variable speed hydraulic drive is also available.
    • A 29" diameter beater with 14 replaceable beater paddles. The beater has two types of paddles, blunt for widespread and sharp ripper type for cutting and shredding. The beater side wiper blades are also standard equipment.
    • An optional second hydraulic end gate cylinder is available. The hydraulic lines are run through a 3x3 tube under the floor. The upright position of the hydraulic cylinder stroke allows the gate to lift with the least strain at pivot points.
    • Adjustment for the main apron is easy, by simply loosening the two side bolts and drawing up the long bolt.
    • Unloading Speed for 3123 and 3127 - (2 speed gear box) High Speed: PTO speed 540 rpm's 8'9" per minute Low Speed: PTO speed 540 rpm's 4'9" per minute.
    • An optional top beater is available to provide load leveling and spreading of high heaped loads.


    FEATURES/OPTIONS Model 3131 - 310 Bushel/Model 3137 - 370 Bushel/Model 3143 - 430 Bushel/Model W3143 - 430 Bushel 

    • A massive unitized welded frame with heavy floor supports and side stakes, wrap around steel front corners. Strong rear main beater side panels are slanted for clearance and wider spread, and then welded to the strong 5" U channel side members compare with any on the market.
    • The side flares on all H&S "Heavy Duty" manure spreaders are made of 10 gauge g210 culvert grade galvanized steel.
    • Sides, front panel and both sides of the rear hydraulic end gate use fiberglass reinforced plywood to provide for easy cleaning and minimal freeze up. It also features a solid virgin grade poly floor. Considerably less torque is needed to move a heavy load.
    • A front splash guard is standard equipment.
    • Greaseable bearings.
    • The two-speed apron drive is standard equipment. An optional variable speed hydraulic drive is also available. As is an optional electric control for the hydraulic drive.
    • A 29" diameter beater with 14 replaceable beater paddles. The beater has two types of paddles, blunt for widespread and sharp ripper type for cutting and shredding. The beater side wiper blades are also standard equipment.
    • The hydraulic endgate features 2 cylinders as standard (optional on the 3131). The hydraulic lines are run through a 3x3 tube under the floor. The upright position of the hydraulic cylinder stroke allows the gate to lift with the least strain at pivot points.
    • H&S uses cast special steel alloy apron idler slides instead of idler sprockets making for years of dependable service.
    • Adjustment for the main apron is easy, by simply loosening the two side bolts and drawing up the long bolt.
    • Gear box mechanisms and drive for the beater and apron are Timken tapered roller bearing equipped. The beater drive gear box is 1-1/2" bevel gear oil bath equipped with a 4-jaw over running clutch for beater shut off. The apron drive is a 50:1 bronze worm gear with shear bolt protection.
    • The strong oil bath bevel gear box that powers the beater is tapered Timken roller bearing equipped. The gear box utilizes a 4-jaw beater shut off clutch and tractor sized spline shaft.
    • Unloading Speed for 3131, 3137, 3143, and W3143 - (2 speed chain drive) High Speed: PTO speed 540 rpm's 8'8.5" per minute Low Speed: PTO speed 540 rpm's 4'8.5" per minute.
    • An optional top beater is available to provide load leveling and spreading of high heaped loads. (Standard in models 3143 & W3143)
    • The W3143 (western) has all the same features as above with additional features such as double main frame channels, additional floor supports, 1045 hardened drive shaft, #80 drive chain and a heavy duty main gear box.


    FEATURES/OPTIONS Model 3156 - 560 Bushel/Model 3166 - 660 Bushel

    • The 3156 and 3166 manure spreaders feature a heavy duty 7" structural Heavy Duty Manure Spreaders steel channel iron frame with a double channel iron pole for superior strength.
    • The box of the 3156 and 3166 spreaders consist of solid virgin grade poly floor, T-bar chain for a strong double main apron and plastic coated plywood sides, front, and endgate.
    • The 3166 running gear consists of stress proof 3" diameter spindles w/12000# hubs and a 4.5" stress proof axle pivot.
    • The 3156 features 425x22.5 used truck tires with 8000 lb. hubs.
    • The side flares on all H&S "Heavy Duty" manure spreaders are made of 10 gauge g210 culvert grade galvanized steel.
    • Variable speed hydraulic drive
    • Constant velocity PTO.
    • A rear side hinged door on the beater drive allows easy access for servicing and adjustment of the spring loaded tighteners. A heavy duty worm drive gear box, chain reduction, and a four jaw override beater clutch are H&S TOUGH!
    • A front splash guard is standard equipment.
    • Greaseable bearings.
    • The beater top is standard equipment and both beaters have 18 replaceable blades.
    • H&S uses cast special steel alloy apron idler slides instead of idler sprockets making for years of dependable service.
    • Adjustment for the main apron is easy, by simply loosening the two side bolts and drawing up the long bolt.
    • A second hydraulic endgate cylinder is standard.
  • HS hydraulic push manure spreader

    4100 SERIES HYDRA-PUSH MANURE SPREADERS

    Hydra-Push Manure Spreaders are available in two models; 4142 – 425 Bushel or 4155 – 550 Bushel
    Features:

    • Both sizes are available with a choice of horizontal or vertical beaters.
    • All Hydraulic Push models use solid virgin grade poly with UV inhibitor, for the floor and sides allowing less friction.
    • The hydraulic endgate has 2 cylinders with 3/8" hose and pipe for faster operation in cold weather.
    • Horizontal beater models feature a top beater as standard equipment.
    • Heavy duty rectangular tubing is used for the pole to ensure strength and long life. Structural channel floor supports spaced 9 1/2" apart are used for maximum floor support.
    • The HP's PTO beater drive system is driven by the unique center drive system that consists of a straight shaft off the PTO underneath the manure spreader to an angle gearbox in the rear, and over to the beater drive sprocket.
    • #80 chains are used for strength and long life and easy open shields makes lubrication easy.
    • The Hydraulic Push-Off System on all models features two hydraulic cylinders that sequence to reduce push-off forces for fast unloading of material.
    • Beater blades are replaceable and the beater assembly is removable for stockpiling manure.
    • Removal of either beater assembly is done by simply removing the mounting bolts, a drive chain and disconnecting the auto-oiler hose on the vertical beater model.
    • Beater gearboxes are safely mounted on the top side of the vertical beaters rather than the bottom to avoid being destroyed by foreign objects.
    • An Auto-oiler for the vertical beater drive chains is standard equipment.
    • The vertical beater features a quick release clean out pan.
  • HS 5215 top shot manure spreader

    TOP SHOT SIDE DISCHARGE MANURE SPREADERS

    ALL MODELS EXCEPT THE 5115 are available with the optional Digi-Star GT400, or Nutrient Tracker Scale System with GPS !
    The heavy-duty expeller system with a quick release poly-lined fine spread pan and side fins help cut the drift of material towards the tractor and spreader, and provide an excellent spread pattern.

    5115 Features – 1286 Gallons:

    • 30" Wide "Top Shot" Expeller Beater
    • 24" Diameter Round Core Segmented Auger
    • Left Side Poly Lined Tank
    • Front Splash Guards
    • Shear Bolt Protection
    • Remote Grease System
    • The Auger System hydraulically raise and lower a full 8” to break-up material that may bridge during the unloading process.
    • Automatic Chain Oiler System (Optional)
    • Highway Lighting System (Optional)
    • Rear Splash Guards (Optional)
    • Tandem axle is available with your choice of 295R x 225 recap tires or 16.5 x 16.1 floatation tires. (Optional)


    5120 Features/2000 Gallons & 5126 Features/2600 Gallons

    • 40" Wide "Top Shot" Expeller Beater
    • 24" Diameter Round Core Segmented Auger
    • Left Side Poly Lined Tank
    • Front and Rear Splash Guards
    • Flip-Over Adjustable Hitch
    • Shear Bolt Protection
    • The auger System hydraulically raise and lower a full 8” to break-up material that may bridge during the unloading process.
    • Automatic Chain Oiler System
    • Highway Lighting System
    • Remote Grease System


    5134 Features/3400 Gallon & 5142 Features/4200 Gallons

    • 40" Wide "Top Shot" Expeller Beater
    • 30" Diameter Round Core Segmented Auger
    • Heavy Duty Gearbox Reduction and an Overrunning Clutch with Shear Bolt Protection
    • Left Side Poly Lined Tank
    • Front and Rear Splash Guards
    • Flip-Over Adjustable Hitch
    • Shear Bolt Protection
    • The auger System hydraulically raise and lower a full 8” to break-up material that may bridge during the unloading process.
    • Automatic Chain Oiler System
    • Highway Lighting System
    • Remote Grease System
    • Hydraulic Lid (Optional)