Meter

NC Meter

ngmeter

 


 

1. Meter Cover / Fill Side

1a. Viewing Window

1b. Seed Clean-out

2. Singulator

3. Seed Disc

4. Agitator

5. Teflon Wear Gasket

6. Hold Down Plate

7. Meter Housing / Drive Side with Adjustment Lever & Vacuum

 


 

ngwebimages1 2

Cover (Exterior)

Cast aluminum cover provides accuracy without variation due to temperature. Easily removable for access to seed discs.

ngwebimages34

Seed Discs

The 1.5 mm thick flat stainless steel discs with mounted brass agitators make a rigid durable meter. Changing is quick and done without tools.

ngwebimagescover

Cover (Interior)

The spring loaded brass ejector block, shown mounted in the Meter Cover, directs seed release at the same consistent angle for consistent spacing.

ngwebimages56

Teflon Wear Gasket

The replacement teflon wear gasket maintains a smooth contact surface and seal between
back of seed plate and vacuum side of the meter.

ngwebimages1a 4

Control Window

A large transparent window aids in fine tuning of the meter for accurate singulation.

ngwebimages7

Meter Cover / Drive Side with Adjustment Lever & Vacuum

ngwebimages2 2

Singulator

The brass singulator eliminates doubles. A spring on the cover maintains positive contact against the disc for optimal singulation, even with small seeds.

 

 


 

Easy Meter Adjustment

Singulator Adjustment Lever controls both vacuum and singulator:

easymeter

easymeter6

Meter exterior showing adjustment lever.

easymeter5

Meter interior showing seed singulator.

easymeter4

Raise to avoid skips vacuum at full.

easymeter3

Also moves singulator higher for larger seeds.

easymeter2

Lower to eliminate doubles and vacuum reduces.

easymeter1

Also moves singulator lower for smaller seeds.